1. Home
  2. Cisco
  3. 350-601

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Exam Details

  • Exam Code
    :350-601
  • Exam Name
    :Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
  • Certification
    :CCNP Data Center
  • Vendor
    :Cisco
  • Total Questions
    :577 Q&As
  • Last Updated
    :Apr 07, 2025

Cisco CCNP Data Center 350-601 Questions & Answers

  • Question 111:

    An engineer must perform a POAP deployment of a Cisco Nexus 9000 Series Switch The switch must automatically receive its software image and configuration file upon power-on. Also, only UDP is permitted between the Nexus 9000 switch and the server that hosts the Cisco NX-OS system images.

    Which set of actions completes the configuration?

    A. Enable option 67. Define TFTP transfer protocol

    B. Enable option 43 Define HTTP transfer protocol.

    C. Enable option 46. Define TFTP transfer protocol

    D. Enable option 35. Define HTTP transfer protocol.

  • Question 112:

    Refer to the exhibit.

    An engineer must mirror the traffic on a switch. The engineer locates the server port that requires monitoring on switch1, but the packet sniffer is on switch2. The engineer must configure the source IP address on switch1.

    Which command accomplishes this goal?

    A. monitor session 10 type erspan-source

    B. monitor erspon origin ip-address 209.165.200.225

    C. source ip 209.165.200.225

    D. source interface vbn512

  • Question 113:

    An engineer must optimize ARP responses and reduce unnecessary ARP broadcasts over the VXLAN/EVPN fabric. Which action accomplishes these tasks?

    A. Configure ip proxy-arp under the VLAN SVI associated with the VXLAN VNI.

    B. Configure ip proxy-arp within the VXLAN VNI configuration under the VTEP NVE interface.

    C. Configure suppress-arp within the VXLAN VNI configuration under the VTEP NVE interface.

    D. Configure suppress-arp under the VLAN SVI associated with the VXLAN VNI.

  • Question 114:

    The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures.

    Which configuration applies the changes for module 1 only?

    A. Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod all test PortLoopback testing-type bootup consecutive-failure 5 Nexus(config-applet)# action 1 publish-event

    B. Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod 1 test PortLoopback testing-type bootup consecutive-failure 5 Nexus(config-applet)# action 1 publish-event

    C. Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod all test PortLoopback testing-type monitoring consecutive-failure 5 Nexus(config-applet)# action 1 policy-default

    D. Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod 1 test PortLoopback testing-type monitoring consecutive-failure 5 Nexus(config-applet)# action 1 policy-default

  • Question 115:

    A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic.

    Which configuration should be applied after the physical connection is established?

    A. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc # mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

    B. UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis/cimc # scope mgmt-conn sideband UCS-A /chassis/cimc/mgmt-conn # mgmt-conn-state enabled UCS-A /chassis/cimc/mgmt-conn* # commit-buffer

    C. UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis /cimc # set mgmt-conn-state enabled UCS-A /chassis /cimc/mgmt-conn* # commit-buffer

    D. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

  • Question 116:

    An engineer must create a backup file of the entire Cisco UCS system before the maintenance window starts. The backup file must include these attributes:

    1.

    all logical configuration settings such as service profiles. VLANs. and VSANs

    2.

    all Cisco UCS usernames. roles, and locales

    3.

    all Cisco UCS system settings

    Which backup type must be selected to achieve this goal?

    A. All Configuration

    B. Full State

    C. System Configuration

    D. Logical Configuration

  • Question 117:

    The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. What configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?

    A. fcoe fcf-priority 1024

    B. fcoe fcf-priority 512

    C. fcoe fcf-priority 0

    D. no fcoe fcf-priority

  • Question 118:

    What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two)

    A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches.

    B. The hypervisors must be installed to Cisco FlexFlash SD cards.

    C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.

    D. The cluster deployment type must support a mix of HDD and SSD.

    E. The servers must be discovered, unassociated, and connected to each fabric interconnect.

  • Question 119:

    A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?

    A. aaa authentication login default fallback error local

    B. aaa authentication login default local

    C. aaa authentication login console local

    D. aaa authentication login console fallback error local

  • Question 120:

    Refer to the exhibit.

    What is the result of implementing the configuration?

    A. RADIUS traffic is sourced from the VLAN 200 interface.

    B. The RADIUS server timeout value is 15 milliseconds.

    C. Only the RADIUS server is used for authentication.

    D. Users specify the RADIUS server when they log in.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.