Exam Details

  • Exam Code
    :HP2-T23
  • Exam Name
    :Supporting Industry Standard Server Solutions
  • Certification
    :HP ExpertONE Certification
  • Vendor
    :HP
  • Total Questions
    :109 Q&As
  • Last Updated
    :Mar 26, 2025

HP HP ExpertONE Certification HP2-T23 Questions & Answers

  • Question 51:

    An engineer added a second Onboard Administrator (OA) module to a c7000 enclosure so the OAs are redundant The modules, however, are not at the same firmware level What is an easy way to bring them to the same firmware version?

    A. Use HP SUM to update both OAs simultaneously

    B. Use the Synchronize Firmware feature in either OA

    C. Use HP SUM Offline to update the standby OA, restart it, and repeat the procedure on the remaining OA.

    D. Use HP Systems Insight Manager (HP SIM) to push the updates to each OA.

  • Question 52:

    What is required by iLO to support agentless management? (Select two)

    A. Write Community

    B. System Location

    C. SNMP Alert Destination

    D. Read Community

    E. Trap Community

  • Question 53:

    A ProLiant DL 380 G7 server has a failure indicating that memory slot DIMM 1 has errors To troubleshoot the problem, you exchange the memory modules in slots 1 and 2 with each other.

    Now you have a memory error indicating that memory slot 1 has errors, and an amber LED next to slot 1 is lit.

    What should you do?

    A. Replace the memory module in slot 1 because it is definitely bad

    B. Replace both memory modules in slots 1 and 2

    C. Run the ECC memory test in the diagnostics to correct the errors

    D. Replace the system board and rerun the memory diagnostics.

  • Question 54:

    Which HP tool is used to configure NIC teaming on a Windows server?

    A. ORCA

    B. Insight Control

    C. PCM+

    D. RBSU

  • Question 55:

    A customer has a c7000 enclosure that is fully populated with ProLiant BL680c server blades. Two months after the initial installation, the rack initiates a thermal shutdown. When diagnosing the problem, you find there is not enough space to get behind the unit. You pull all the units out but find no problems with the chassis, blades, or their cooling systems.

    What is a possible cause for the thermal shutdown?

    A. The air temperature in the data center is set too low. so the enclosure fan system is rotating at a low RPM and not removing sufficient thermal heat

    B. The enclosure's fan system is not strong enough to remove the thermal heat generated in a fully populated enclosure.

    C. The rack is too close to the cold air outlet. The hot air area is too large, and the cooling system is unable to recalculate the hot air effectively.

    D. There is insufficient air circulation causing hot air from the rear of rack to be fed back to the equipment through the front of the rack.

  • Question 56:

    What is needed to support Dynamic Power Capping at the enclosure level?

    A. Insight Control power management software

    B. Redundant Onboard Administrator modules

    C. Redundant power supplies

    D. Intelligent PDU (iPDU) and intelligent extension bars

  • Question 57:

    After a system administrator replaces a system board on an HP server blade, the BIOS update fails. After it reboots, the server works with the old BIOS version.

    What is the next step to troubleshoot this issue?

    A. Use RBSU to clear the NVRAM.

    B. Order a new system board

    C. Use a new Firmware Update CD.

    D. Attempt to reflash the BIOS again.

  • Question 58:

    Which type of memory is used on the HP Smart Array controller cache?

    A. RDRAM

    B. DRAM

    C. SRAM

    D. SDRAM

  • Question 59:

    If you install two Onboard Administrator modules with different firmware revisions in a c7000 enclosure, which module will be active by default?

    A. The one on the left of the enclosure

    B. The one on the right of the enclosure

    C. The one with the latest firmware, regardless of position

    D. The one with the original firmware regardless of position

  • Question 60:

    What are features of the HP ProLiant MicroServer? (Select two.)

    A. Sound level of at least 85 DBa

    B. SATA 3.5 inch LFF drives

    C. SAS 2.5 inch SC hot-plug drives

    D. AMD processor

    E. Intel processor

    F. Fibre Channel drives

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your HP2-T23 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.