HP ASE HP2-Z32 Questions & Answers

• Question 1:

  A company has an MSM720 Controller and wants to implement a team solution. What is the guideline for implementing teaming with MSM720 Controllers?

  A. The team can include a maximum of five members, which must have a Premium license.

  B. The team can include a maximum of five members, which must have a Mobility license.

  C. The team can include a maximum of two members, which must both have a Premium Mobility license.

  D. The team can include a maximum of three members, which must have a Teaming license.

  Correct Answer: C

• Question 2:

  Refer to the exhibit.

  

  The exhibit shows a VSC setting that is disabled. A network administrator is creating an access- controlled VSC for guest access. Which use case does disabling this setting impact?

  A. The company has central RADIUS servers and web servers, which it wants to use to authenticate guests.

  B. The controller is part of a teaming solution.

  C. Guests need to log into the controller's local pages to receive access to any resources.

  D. Guests need to receive access to resources on their local subnet before authenticating.

  Correct Answer: D

• Question 3:

  A company wants to authenticate wireless users to user accounts configured on the MSM Controller. Which settings must be defined in the VSC for those users? (Select two.)

  A. HTML-based authentication must be enabled.

  B. Use the controller for authentication must be enabled.

  C. Use the controller for access control must be enabled.

  D. 802.1X authentication must be enabled.

  E. The authentication method (any type) must be set to Local.

  Correct Answer: CD

• Question 4:

  An MSM network administrator creates an access-controlled VSC and enables DHCP services on this VSC. The network administrator sets the DHCP subnet in the guideline should the administrator follow?

  A. Use the 192.168.1.0/24 subnet as the teaming subnet if a team is required.

  B. Use the controller's IP address on 192.168.1.0/24 subnet as its management address.

  C. Assign the 192.168.1.0/24 subnet to the controller's LAN port (untagged).

  D. Do not set the 192.168.1.0/24 subnet on any IP interface on the controller.

  Correct Answer: B

• Question 5:

  What are two factors of a radio's Effective Isotropic Radiated Power (EIRP)? (Select two.)

  A. Number of stations in the cell

  B. Receiver sensitivity

  C. Transmit power

  D. Antenna pattern

  E. Cable loss

  Correct Answer: CE

• Question 6:

  A company has an MSM solution that is providing wireless access for its employees. The company now needs a simple wireless guest solution, and the MSM administrator is creating modern for guests' an access controlled VSC for this

  purpose. The company has a cable Internet access, and the controller should route traffic directly to the Internet Service Provider (ISP) router through this modern. The MSM administrator has created an IP interface for VLAN 1000 on the

  controller's Internet port.

  What else must the MSM administrator do?

  A. Create a route to the ISP router through the core switch.

  B. Connect the controller's LAN port to the cable modern.

  C. Disconnect the controller's Internet port from the core switch and connect it to the cable modern.

  D. Set VLAN 1000 as the egress VLAN in the guest VSC.

  Correct Answer: D

• Question 7:

  A network administrator installs an HP MSM765 zl controller in slot D of HP 8212 zl switch. The network administrator plans to configure a management IP address on the controller's (untagged) Internet port network.

  This address is in the subnet that is associated with VLAN 2 in the corporate LAN. How should the network administrator configure the HP 8212 zl switch?

  A. Specify VLAN 2 as the tagged VLAN on interface d1.

  B. Specify VLAN 2 as the tagged VLAN on interface d2.

  C. Specify VLAN 2 as the untagged VLAN on interface d1.

  D. Specify VLAN 2 as the management VLAN and assign VLAN 2 to interface d2.

  Correct Answer: D

• Question 8:

  A company has an MSM765 zl Controller that is managing more than one hundred APs. To increase redundancy, the company is adding another MSM765 zl Controller, which will form a team with the first. The controller currently supports an access-controlled VSC for guests. It assigns IP addresses to guest clients, directs the clients to its local web pages, and authenticates the guests to a local user account. Which aspect of this solution should the network administrator change in order implement teaming?

  A. Controllers should use non-access-controlled VSCs with the guest login pages.

  B. Controllers should now direct guests to pages on an external web server.

  C. Controllers should use DHCP relay instead of assigning IP addresses to clients.

  D. Controllers should now authenticate guests to an external RADIUS server.

  Correct Answer: A

• Question 9:

  A network administrator wants to collect and monitor statistics from across an enterprise wireless network. The network includes three HP MSM765 Controllers and 440 HP MSM APs. The network administrator also wants to monitor other network infrastructure devices, including HP and non-HP switches. Which solution best provides this capability?

  A. HP RF Manager

  B. HP Intelligent Management Center (IMC) Basic Software Platform

  C. HP Manager and RF Planner

  D. HP IMC and Wireless Services Manager (WSM)

  Correct Answer: D

• Question 10:

  A network administrator configures most settings for an HP MSM team from the team Web browser interface. However, the network administrator must configure a few settings from the interface of the individual member. What is one of these settings?

  A. Certificates

  B. Subscripting plans

  C. DHCP relay settings

  D. Virtual service communities (VSCs)

  Correct Answer: C