HP ASE HP2-Z32 Questions & Answers

• Question 101:

  A company has an HP MSM solution with an MSM Controller and APs.

  The company requires a WLAN that enforces WPA2 with 802.1X authentication. The company has a RADIUS server that will authenticate wireless users. The RADIUS server administrators would prefer to define just one RADIUS client on the server. Which VSC setting should the MSM administrator plan for this scenario?

  A. Centralized access control (Use the Controller for Access control option)

  B. Preshared encryption keys for WPA2 encryption (Preshared Key for Key source)

  C. Centralized authentication (Use the Controller for Authentication option)

  D. Local authentication (Local setting for 802.1X authentication)

  Correct Answer: D

• Question 102:

  Which feature should you enable to enhance Layer 2 (L2) roaming?

  A. Seamless roaming

  B. Rapid authentication C. WPA2 Opportunistic Key Caching

  D. Single network AP hopping

  Correct Answer: C

• Question 103:

  A network administrator maps a network profile with aVLAN ID 512 to the LAN port of an HP MSM765zl Mobility Controller The network administrator configures an IP interface for this profile and intends to contact and manage the controller

  on this interface.

  All other settings remain at default.

  What is one step that the network administrator must complete before connecting to the controller on its new IP address?

  A. Set the untagged LAN port network interface IP address to none.

  B. Enable Spanning Tree Protocol (STP) on the interface.

  C. Select the new IP interface as an active interface in the Controller 籑anagement>; Management tool window

  D. Set the IP interface as the authorized egress VLAN in the default VSC.

  Correct Answer: D

• Question 104:

  Refer to the exhibit.

  

  A network administrator needs to configure a local mesh between the three APs shown in the exhibit. The network administrator configured AP1 for the master role. What are valid roles for AP 2 and AP 3?

  A. 2 = Alternate Master; 3 - Slave

  B. 2 = Slave; 3 = Alternate Master

  C. 2 = Slave; 3 = Master

  D. 2 = Slave; 3 = Slave

  Correct Answer: C

• Question 105:

  A network administrator deploys several HP MSM APs and an HP MSM Controller. The APs discover the controller, establish management tunnels, and become synchronized. The administrator wants to check some settings on one of the

  APs and attempts to reach its web browser interface, but the request times out.

  However, a ping to the AP succeeds.

  What explains this behavior?

  A. The global setting for controlled AP provisioning is disabled.

  B. The APs' Web interfaces are not available after they become managed by the controller.

  C. The APs' Web management tool features have been disabled either at the AP group level or the controlled AP level.

  D. The controller has deployed an access control list (ACL) to the AP. The management station's address must be added to this list.

  Correct Answer: C

• Question 106:

  A company is deploying an HP MSM760 Controller that will control approximately 80 HP MSM APs. The HP MSM solution will provide wireless guest services and a WLAN for employees, which is secured with WPA2 and 802.1X.

  The controller will perform the following functions: Handle all guest traffic

  Provide DHCP services for guest clients

  Force guests to log in through a web page and implement access controls

  How should the network administrator connect the controller to the corporate LAN?

  A. The administrator must connect both the LAN port and the Internet port, and the ports must be in different VLANs.

  B. The administrator can connect either the LAN port or the Internet port, or both ports, but it is typically recommended to connect the Internet port.

  C. The administrator must connect both the LAN port and the Internet port, and the ports must be in the same VLAN.

  D. The administrator must connect only the LAN port.

  Correct Answer: D

• Question 107:

  Refer to the exhibits.

  

  Click here for Exhibit 2 -Portion of VSC settings and example of VSC binding Exhibit 1 shows the network topology for an HP MSM Controller and its controlled HP MSM APs. Assume that

  the APs have successfully discovered the controller and become managed. Exhibit 2 shows a portion of the VSC settings for a VSC that this solution supports.

  This VSC is the default VSC.

  The controller must provide DHCP services for clients connected to this VSC, but does not need to provide addresses for any other purpose. The global DHCP settings include two options for

  listening for requests. Which options must be enabled, and which can be disabled?

  

  Hot Area:

  

  Correct Answer:

  

• Question 108:

  Select the appropriate descriptions for open and closed systems.

  

  Hot Area:

  

  Correct Answer:

  

• Question 109:

  Refer to the exhibit.

  

  A network administrator enables 802.1X authentication on a VSC. The HP MSM Controller implements the RADIUS server settings shown in the exhibit. Which devices require certificates?

  

  Hot Area:

  

  Correct Answer:

  

• Question 110:

  What should match on HP MSM Controllers in order for the team to form properly?

  

  Hot Area:

  

  Correct Answer: