HP ASE HP2-Z32 Questions & Answers

• Question 11:

  Refer to the exhibit.

  

  A hospital has an HP MSM solution that provides guest access, including Web-Auth to the local login pages of the controller. The exhibit shows the Hospital VSC used by guests. The network administrators have created an isolated guest VLAN, VLAN 100. The HP MSM Controller should provide the same guest services to wired clients connected to this VLAN. The network administrator has configured a network profile and the required settings. How should the controller apply the profile in the VSC?

  A. As the egress VLAN for unauthenticated users

  B. As the egress VLAN for authenticated users

  C. As the ingress VLAN

  D. As the egress VLAN for intercepted users

  Correct Answer: A

• Question 12:

  A company has an MSM solution that includes an MSM 760 Controller and MSM APs. The VSC for the employees does not use the controller for access control, nor does it use wireless mobility. Employees' wireless clients should be assigned to VLAN 10. How should the Ethernet network administrators design VLAN 10?

  A. Extend VLAN 10 from its default router to the MSM Controller's LAN port.

  B. Extend VLAN 10 from its default router to the APs' switch ports

  C. Extend VLAN 10 from the MSM Controller's LAN port to the APs' switch ports.

  D. Extend VLAN 10 from its default router to the MSM Controller's Internet port.

  Correct Answer: C

• Question 13:

  A company has an HP MSM solution. The HP MSM APs deployed at one site are managed by HP MSM Controller. The HP MSM Controller is deployed at another site. The APs tunnel client data traffic to the controller. Which guideline should the network administrator follow to ensure the solution works correctly?

  A. No firewall between the APs and the controller can implement NAT.

  B. Because the tunnel cannot be established on a tagged VLAN, the egress network in the VSC binding of the APs must not be configured.

  C. Any firewall between the APs and the controller must permit traffic destined to the controller on UDP ports 3000 and 3001.

  D. The tunnels must terminate on the controller's IP address in its untagged LAN port interface Get Latest and or for an MSM720 its Access network.

  Correct Answer: B

• Question 14:

  A multiple-input, multiple-output (MIMO) device has a 2 x 3 configuration.

  Which statement about this configuration is true?

  A. The device can transmit two and three spatial streams.

  B. The device has two antennas that each support three spatial streams.

  C. The device can transmit to six clients at once, using slightly different frequencies.

  D. The device has two transmitting antennas and three receiving antennas.

  Correct Answer: B

• Question 15:

  A network administrator maps a network profile with a VLAN IF 512 to the LAN port of an HP MSM765 zl Mobility Controller. The network administrator configures an IP interface for this profile and intends to contact and manage the controller on this interface. All other settings remain at default.

  What is one step that the network administrator must complete before connecting to the controller on its new IP address?

  A. Set the IP interface as the authorized egress VLAN in the default VSC.

  B. Set the untagged LAN port network interface IP address to none.

  C. Select the new IP interface as an active interface in the Controller >> Management > Management tool window.

  D. Enable Spanning Tree Protocol (STP) on the interface.

  Correct Answer: A

• Question 16:

  What does this exhibit show?

  

  A. Wireless bridging

  B. Basic service set (BSS)

  C. Wireless distribution system (WDS)

  D. Extended service set (ESS)

  Correct Answer: B

• Question 17:

  Which VSCs require the implementation of opportunistic key caching?

  A. Any VSCs that is secured by WPA/WPA2 with 802.1X

  B. All VSCs that are secured by WPA/WPA2-PSK or WPA/WPA2 with 802.1X

  C. Any VSC that supports Layer 3 roaming

  D. All access-controlled VSCs

  Correct Answer: B

• Question 18:

  The VSC settings on an HP MSM Controller include a checkbox for SSID broadcasting. How do APs that support this VSC behave if a network administrator clears this checkbox?

  A. The APs do not include the SSID in the beacons that they periodically transmit.

  B. The APs suppress unnecessary broadcast traffic received from VLANs associated with this SSID, including DHCP discovery broadcasts and some ARP requests.

  C. The APs suppress unnecessary broadcast traffic received from wireless clients associated with this SSID, with the exception of DHCP discovery broadcasts and ARP requests.

  D. The APs and clients do not include the SSID in any frames, including control frames, management frames like beacons, and data frames.

  Correct Answer: C

• Question 19:

  What is one factor that a wireless network designer must consider when estimating path loss between an AP and a client?

  A. The antenna gain

  B. The transmit power of the AP

  C. The client receiver sensitivity

  D. The type of environmental obstruction

  Correct Answer: D

• Question 20:

  What distinguishes HP MSM APs that implement a dynamic mesh link from HP MSM APs that implement a static link?

  A. The APs using the dynamic link can automatically negotiate the VLAN for egressing user traffic.

  B. The APs using the dynamic link can establish new links between each other if one of the APs fails.

  C. The APs using the dynamic link can authenticate each other with 802.1X and receive the key for encrypting traffic sent on the link in that way.

  D. The APs using the dynamic link can negotiate type of encryption that they will use dynamically.

  Correct Answer: B