A company has an HP MSM solution that consists of an HP MSM760 Access Controller and controlled HP MSM APs. The solution includes a VSC that enforces local Web-Auth (HTML- based user login) using web pages and guest accounts configured on the controller The company wants to prevent guests from logging in after normal business hours. Which action describes the correct setting to meet these requirements?
A. Create a subscription plan that specifies the valid login times, and apply the plan to the guest accounts.
B. Configure the valid login times in a RADIUS server policy, which then apply to the site or to individual user accounts.
C. Set the valid login times in the Virtual Service Community (VSC) used by guests.
D. Set the valid login times in the global access control settings of the controller (Controller? Public access > Access control).
When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
What distinguishes an HP MSM460 AP from an HP MSM430 AP?
A. The MSM460 radios support 802.1n, while the MSM430 radios only support 802.11b/g/a.
B. All radios on an MSM460 support 802.11n, while only one radio on an MSM430 supports this standard.
C. The MSM460 radios support three spatial streams, while the MSM430 radios support two spatial streams.
D. The MSM460 supports 802.11n with MIMO on all radios, while the MSM430 supports 802.11n without MIMO.
An MSM administrator creates an access-controlled VSC, which is not the default VSC, on a standalone MSM Controller The controller should implement DHCP relay on this VSC; clients will receive IP addresses from an external DHCP server The DHCP scope for the clients uses 192.168.1.0/24 and sets the default gateway to 192.168.1.1. The 192.168.1.0/24 subnet is reserved for the wireless clients and does not exist in the LAN.
Which requirement applies to this scenario?
A. The guests must log into a web page hosted on an external server to authenticate on this VSC.
B. The 192.168.1.0/24 subnet must be configured on the controllers LAN port.
C. The DHCP server, or its default gateway, needs a route to 192.168.1.0/24 through the MSM Controller.
D. The APs that support this VSC must receive IP addresses from the same DHCP server as the clients.
A company has two MSM760 Controllers that form a team. Some of the company's APs connect in remote offices and require Layer 3 discovery settings. The company has selected the DHCP option for Layer 3 discovery.
What should be included in the DHCP option list?
A. The team manager's IP address (the manager's actual IP address on the teaming subnet
B. Both controllers' IP addresses on an interface on which AP discovery is enabled
C. The team's IP address (the virtual address hosted by the team manager)
D. The hostname that is mapped to the team manager's IP address
What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
What are the major benefits of creating a team of controllers? (Select two.)
A. Controller redundancy
B. Flow support
C. Local DHCP support
D. PPTP client and server support
E. Single IP management of all team controllers
When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port Get Latest and Actual HP2- Z32
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
In order to create a new VLAN in an MSM controller configuration, which path should you take to access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
HP MSM APs support a VSC that specifies 54 Mbps as the highest supported data rate. Several clients connect to the WLAN associated with this VSC. What is the throughput and bandwidth that the clients experience?
A. All clients connected to an AP radio share a throughput of less than 54 Mbps, but a client can transmit or receive at 54 Mbps.
B. When multiple clients connect to an AP radio, each of those clients is limited to 54 Mbps.
C. All clients connected to the VSC share a total of 54 Mbps of throughput regardless of how many AP radios support the VSC.
D. When multiple clients connect to an AP radio, each client typically receives about 50 Mbps throughput.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your HP2-Z32 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.