Cisco CCNP Data Center 350-601 Questions & Answers

• Question 71:

  Refer to the exhibit.

  

  An engineer must activate the port-security database on a Cisco MDS 9000 Series Switch for VSAN 100, but receives the error shown. Which command completes the configuration?

  A. port-security config-enable vsan 100

  B. port-security vsan 100 database active

  C. port-security enabled mode vsan 100

  D. port-security activate vsan 100 force

  Correct Answer: D

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/psec.html#54776

• Question 72:

  DRAG DROP

  A network engineer must implement a telemetry solution to collect real-time structured data in a large-scale network. Drag and drop the actions from the left into the order on the right to implement the solution. Not all actions are used.

  Select and Place:

  

  Correct Answer:

  

  switch# show running-config | section telemetry feature telemetry telemetry destination-group 100 ip address 1.2.3.4 port 50004 protocol gRPC encoding GPB sensor-group 100 path sys/bgp/inst/dom-default depth 0 subscription 600 dst-grp 100 snsr-grp 100 sample-interval 7000 switch# show running-config | section telemetry > telemetry_running_config switch# show file bootflash:telemetry_running_config feature telemetry telemetry destination-group 100 ip address 1.2.3.4 port 50004 protocol gRPC encoding GPB sensor-group 100 path sys/bgp/inst/dom-default depth 0 subscription 600 dst-grp 100 snsr-grp 100 sample-interval 7000 switch#

• Question 73:

  DRAG DROP

  Drag and drop the NAS and NFS concepts from the left onto the definitions on the right.

  Select and Place:

  

  Correct Answer:

  

  NFS Data storage and file sharing requests are sent and received The protocol is regularly used on Linux segment

  NAS Software is deployed on a lightweight OS that is embedded in the hardware The vendor-agnostic protocol is supported on any hardware and OS

• Question 74:

  DRAG DROP

  

  The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1. Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.

  Select and Place:

  

  Correct Answer:

  

• Question 75:

  DRAG DROP

  An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements uk.co.certification.simulator.questionpool.PList@1a00c470.

  Drag and drop the configuration commands from the right to the left to meet the requirements. The commands are used more than once. Not all commands are used.

  Select and Place:

  

  Correct Answer:

  

• Question 76:

  DRAG DROP

  Drag and drop the Hyperflex characteristics from the left onto the appropriate Hyper Hex node types on the right.

  Select and Place:

  

  Correct Answer:

  

• Question 77:

  DRAG DROP Refer to the exhibit.

  

  An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements

  1.

  The local update source for leaf switches must be loopback 1

  2.

  The router ID must be the local loopback IP address

  3.

  The external BGP connections must use a template name Drag and drop the configuration snippets from the bottom to complete the configuration

  Select and Place:

  

  Correct Answer:

  

• Question 78:

  DRAG DROP Refer to the exhibit.

  

  An administrator must complete the unified fabric configuration between Server1 and a pair of Cisco Nexus 9000 Series Switches.

  Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the N9K-1 configuration Snippets are used more than once.

  Select and Place:

  

  Correct Answer:

  

  The following example shows how to configure the VLAN on a physical Ethernet address, create virtual Fibre Channel interface 4, bind vfc 4 to the physical Ethernet interface, enable associated VLAN 200, and map VLAN 200 to VSAN 2: switch# configure terminal switch(config)# interface ethernet 1/2 switch(config-if)# switchport mode trunk switch(config-if)# switchport trunk allowed vlan 1,200 switch(config)# interface vfc 4 switch(config-if)# bind interface ethernet 1/2 switch(config-if)# exit

• Question 79:

  DRAG DROP

  An engineer must configure a control plane policy on a Cisco Nexus 9000 Series Switch that is located at IP 192.168 20.1 that moots those requirements:

  1.

  Only HTTP. RDP. and ICMP traffic is permitted from subnet 192.168.10.0/24.

  2.

  The committed information rate must be 54000 pps.

  3.

  The burst size must be 128 packets.

  4.

  Any other traffic must be dropped.

  Drag and drop the code snippets from the bottom onto the blanks in the code on the top to complete the configuration. Not all code snippets are used.

  Select and Place:

  

  Correct Answer:

  

• Question 80:

  DRAG DROP

  An engineer must configure an LACP port channel on two Cisco Nexus 7000 Series Switches.

  The interface e1/2 must be a hot-standby link that initiates negotiation with other ports.

  Drag and drop the commands from the right onto the blanks in the configuration on the left.

  Not all commands are used.

  Select and Place:

  

  Correct Answer: